Filter
Top Products
–
16
–
EN
DVD FUNCTIONS
Display Setting
B
You can change the display functions. Follow steps 1 to 2 on page 15.
3 Select the desired item.
Language
Display
Video
Audio
Others
Angle Icon
Screen Saver
Display menu
ENTER
4
Angle Icon: (Default: On)
See note on the right.
Language
Display
Video
Angle Icon
Screen Saver
Angle Icon
Screen Saver
On
Off
Select the
desired
setting.
Select the
desired
setting.
Screen Saver: (Default: On)
See note on the right.
Language
Display
Video
Angle Icon
Screen Saver
Angle Icon
Screen Saver
On
Off
Video Setting
C
You can change the video functions. Follow steps 1 to 2 on page 15.
3 Select the desired item.
Language
Display
Video
Audio
Others
TV Aspect
Progressive
Video menu
ENTER
4
TV Aspect: (Default: 16:9 Wide)
Sets the aspect ratio of the playback
image to fit your TV.
Language
Display
Video
Audio
TV Aspect
Progressive
TV Aspect
Progressive
16:9 Wide
4:3 Letter Box
4:3 Pan & Scan
Select the
desired
setting.
TV Aspect
Progressive
On
Off
Language
Display
Video
Audio
TV Aspect
Progressive
Progressive: (Default: Off)
Changing ”Progressive” setting is not
available while HDMI cable is connected.
Before proceeding…
Make sure your TV supports the selected item.
Connect with component video cable.
NOTE: If a blank screen appears, wait for 15 seconds
for auto-recovery.
Activate?
Progressive On
Select:
K / L
Set:ENTER
Ye s
No
If there is no picture
or you do not press
any buttons for 15
seconds, “Progressive”
will switch to “Off”
and it will exit the
setup menu.
Select “Yes”.
Select
“On”.
5 To exit the menu
Note:
Angle Icon:
• Set to “On” to display
when multiple camera
angles are available
during DVD playback.
Screen Saver:
• Sets whether to
activate the screen
saver after 5 minutes of
no action on the unit.
Note:
TV Aspect:
• Select “16:9 Wide”
if a wide-screen TV is
connected to this unit.
• Select “4:3 Letter Box”,
so that black bars may
appear on the top
and bottom of the TV
screen.
• Select “4:3 Pan & Scan”
for a full height picture
with both sides adjusted.
Progressive:
• You can set
“Progressive” to “Off”
in “Video” menu or
press and hold
[
PLAY B
] on the
front of the unit for
more than 5 seconds
during playback.
• When “Progressive”
is “On”, video signals
from the unit’s VIDEO
OUT and S-VIDEO OUT
jacks will be distorted
or not be output at all.
5 To exit
“TV Aspect” menu
To complete
“Progressive”
setting