Filter
Top Products
35EN 35EN
Recording
Playback Editing
Introduction
Connections Basic Setup Function Setup VCR Functions
Others Español
EXTERNAL DEVICE RECORDING
Recording from an External Device
Before recording from an external device, refer to the
instructions for the connection on page 34.
STANDBY-ON
TIMER SET
ABC DEF.@/:
JKL MNOGHI
TUV WXYZ
SPACETIMER CLEAR
SETUPDISC MENU
RETURNTITLE
TRACKING
VCR DVD
AUDIOREC
REC MODE D.DUBBING
CM SKIP
SEARCH RAPID PLAY
PQRS
SOURCE
123
456
78
0
OK
+--
o
p
B
B
iji
C
F
gh
s
9
DISPLAY OPEN/CLOSE
A
I
STANDBY-ON
SOURCE
OPEN/CLOSE
A
REC MODE
VCR DVD
1
Turn on the TV and press
[STANDBY-ON
y
y], and be sure to
select the input of the TV to which
the unit is connected.
2
When you want to record to the disc:
Press [DVD].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
It takes a while to load
the disc.
When you want to record to a
cassette tape:
Press [VCR].
Insert the cassette tape with a erase-
protection tab into the cassette
compartment.
3
Select the input of the unit which the
external device is connected. (E2 or
E1)
• To use the input jacks on the rear of this unit;
Select “E1 (Rear)” position by using [SOURCE].
• To use the input jacks on the front of this unit;
Select “E2 (Front)” position by using [SOURCE].
4
Press [REC MODE] to select a
recording mode.
Refer to “Recording Mode” on page 22 for DVD
or “Recording” on page 79 for VCR.
5
Press [RECORD I] (DVD or VCR) on
the unit to start recording.
6
Start playback on the external device
to record from.
7
For disc:
Press [STOP C] on the unit to stop
recording.
For cassette tape:
Press [STOP C/EJECT A] on the unit
to stop recording.
This operation may take a
while to be completed.
2
17
7
5
5