Filter
Top Products
–
9
–
EN
Functions
STANDBY-ON
AUDIO
SUBTITLE
ANGLE
REPEAT
CLEAR
A
-
B
PAUSE
SLOW
SKIP
OPEN/CLOSE
DISPLAY
SEARCH
MODE
12
3
45
6
78
9
0
+10
PLAY
REV FWD
STOP
Functions
Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.
Playback
Before: Turn on the TV, amplifier and any
other equipments which are connected
to this unit. Make sure the TV and audio
receiver (commercially available) are set
to the correct channel.
(
⇒
Page 10
)
Hint
•
When you play an MP3-format disc, details on page 10.
•
A “prohibited icon” may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this unit.
•
Some DVDs may start playback from title 2 or 3 due to specific programs.
•
During the playback of a two-layered disc, pictures may stop for a moment. This happens
while the 1st layer is being switched to the 2nd layer. This is not a malfunction.
4
3
1
OPEN/
CLOSE
PLAY STOP
IR
TIP
:
You can change the On-Screen language in “PLAYER MENU”
setting. (Refer to page 14.)
1
Press [STANDBY-ON] to turn on
the DVD/CD Player.
2
Press [OPEN / CLOSE A] and
insert a disc with label facing up.
3
Press [PLAY B] to start playback.
4
Press [STOP C] to stop playback.
2
22
1
Lights up when power is on.
Resume
Press [STOP C] during playback. Resume icon
will appear at the top-left on the TV screen.
Press [PLAY B], playback will resume from
the point at which playback was stopped.
Slow Forward Search
Press [FWD g] repeatedly in the pause
mode to select the required forward speed.
To continue playback, press [PLAY B].
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Hint
• Slow forward speed is different depending on the disc.
Approximate speed is 1(1/32), 2(1/16), 3(1/8), 4(1/4) and 5(1/2).
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to pages 14-15.)
• The reverse of slow playback is not available.
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly
during playback to select the required
forward or reverse speed.
To continue playback, press [PLAY B].
1
E
1
Hint
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in
the pause mode are blurred. (Refer to pages 14-15.)
PAUSE
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
R.STOP
Hint
•
To cancel resume, press [STOP C] one more time in the stop mode.
• The resume information will be kept even when unit is in standby
mode. For MP3, playback will resume from the beginning of the
track at which playback was stopped.
Hint
• Fast forward or reverse search speed is different depending on
the disc. Approximate speed is 1(x2), 2(x4), 3(x8), 4(x16) and
5(x32).
Hint
•
Zooming function does not work while the disc menu is displayed.
• Some part of the picture may not be zoomed depending on the
disc or playback status.
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x3, x4, x1/2 or OFF.
x2 x3 x4 x1/2
2) Use [K / L / s / B] to slide the zoomed picture across
the screen.
3) To exit zoom function, press [ZOOM] repeatedly to select
OFF.
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
2
3
4
E6C0SUD.indd 9E6C0SUD.indd 9 2006/07/06 12:05:402006/07/06 12:05:40