Filter
Top Products
–
10
–
EN
DVD FUNCTIONS
DVD FUNCTIONS
Please note : most instructions in this manual refer to remote control use.
Playback
Before:
Turn on the TV, amplifier and any other
device which are connected to this unit.
Make sure the TV and audio receiver (not
supplied) are set to the correct channel.
(
on page 11
)
Note:
• When you play back a DVD or CD-RW/-R with
MP3 / JPEG files, details on page 11.
• A “
” may appear at the top-right on the TV
screen when the operation is prohibited by the disc or this
unit.
• Some DVD may start playback from title 2 or 3 due to specific
programs.
• During the playback of a 2-layered disc, pictures may stop for
a moment. This happens while the 1st layer is being switched
to the 2nd layer. This is not a malfunction.
• You can change the on-screen language in “Player Menu”
setting. (Refer to page 15.)
4
3
1
1
Press [STANDBY-ON] to turn on this
unit.
2
Press [OPEN / CLOSE A] and insert a
disc with label facing up.
3
Press [PLAY B] to start playback.
4
Press [STOP C] to stop playback.
2
Lights up when power is off.
Resume Playback
Press [STOP C] during playback. Resume icon
will appear at the top-left on the TV screen. Press
[PLAY B], playback will resume from the point at
which playback was stopped.
Slow Forward / Reverse Search
Press [FWD g] or [REV h] repeatedly
in the pause mode to select the required
forward / reverse speed.
To continue playback, press [PLAY B].
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Note:
• Slow forward / reverse speed is different depending on the
disc. Approximate speed is x1/32, x1/16, x1/8, x1/4 and x1/2.
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly during
playback to select the required forward or
reverse speed.
To continue playback, press [PLAY B].
D
SF x1/32
E
FR x 2
Pause
Note:
• Menu operations may vary depending on the disc. Refer to
the manual accompanying the disc for more details.
R.Stop
Note:
• To cancel resume, press [STOP C] one more time in the stop
mode.
• The resume playback information stays on even when the
power is turned off, as long as the disc stays in the unit.
Note:
• Fast forward or reverse search speed is different depending
on the disc. Approximate speed is x2, x4, x8, x16 and x32.
Note:
• Zooming function does not work while the disc menu is
displayed.
• Some part of the picture may not be zoomed depending on
the disc or playback status.
Disc Menu
Some discs contain menus which allow you to customize DVD
playback. Use [K / L / s / B] to select an item, then press
[ENTER] or [PLAY B].
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the disc menu.
• Press [TOP MENU] to call up the title menu.
2
Lights up when discs playback.
x
2
Zoom
1) Press [ZOOM] repeatedly during playback
to select the required zoom factor: x2, x3,
x4, x1/2, x1/3, x1/4 or off.
2) Use [K / L / s / B] to slide the zoomed
picture across the TV screen.
3) To exit zoom function, press [ZOOM]
repeatedly to select off.
2 14 3