Filter
Top Products
8239 300 31052
Printed in China
NO DISC
OPEN/CLOSE
STOP PLAY/PAUSE
STANDBY
-
ON
DVD V IDEO PLAYER
MDV458
PROGRESSIVE SCAN
IR
NO DISC
LABEL
To simply play a Disc, follow these steps. Additional playback
features are described in the accompanying owner’s manual.
1
Press STANDBY-ON on the front of the DVD Player to
turn on the DVD Player.
2
Turn on your TV. Set it to the correct AV In channel.
You should see the DVD Player’s blue DVD screen on the TV
(if no Disc is in the DVD Player).
3
Press OPEN/CLOSE / on the front of the DVD Player to
open the disc tray.
4
Load your Disc in the tray, with the label facing up. If the
Disc (DVD) is two-sided, make sure the label of the side you
want to play is facing up. Press OPEN/CLOSE / again to
close the tray.
5
Playback may start automatically. If not, press PLAY B.
If a Disc menu appears, use the 1 234 and OK buttons or the
Number buttons to select features or start playback from a
menu. Follow the instructions in the Disc menu.
6
To stop playing the Disc, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or for Region 1 in order
to play on this DVD Player. You cannot play Discs that are labeled for
other regions. If one of these logos appears on your DVD or its case, it
should play on this DVD Player.
Color Systems
Recordings are made according to a color system. The most common
color system in the United States is NTSC.This DVD Player is compatible
with NTSC and PAL. Make sure the Discs you play were recorded in
NTSC or PAL and your TV is NTSC or PAL compatible. Look for
the color system of the DVD on the DVD or on the Disc case. Set TV
Type accordingly at the DVD Player. See page 36 of the owner's manual.
PALNTSC
REMOTE CONTROL
PREVIEW
RETURN/TITLE
PLA
Y
PREV
STOP PAUSE
DISC MENU SYSTEM MENU
SUBTITLE ZOOMANGLE
REPEAT AUDIOREPEAT A-B
NEXT
DISPLAY
MUTE
OK
5
6
Quick-Use Guide (cont’d)
Quick-Use Guide (cont’d)
1
2
Detailed playback features and additional functions are described in the
accompanying owner’s manual.
3-4