20
EN
BASIC PLAYBACK
HDMI
C
LEAR
A-
B
MO
D
E
SU
BTITL
E
AUDIO
DI
S
PLAY
S
EAR
CH
STANDBY-ON
OPEN/
CLOSE
OK
1
Press [STANDBY-ON y ].
2
Turn on the TV and select the
appropriate input on the TV to which
the unit is connected.
3
Press [OPEN / CLOSE A ] to open the
disc tray.
4
Place the disc on the disc tray with its
label side facing up.
Align the disc to the
disc tray guide.
5
Press [OPEN / CLOSE A ] to close the
disc tray.
It may take a while to load the disc.
Some discs may start playback automatically.
6
Press [PLAY B] to start playback.
For many of BD-video and DVD-video, a menu
screen may appear.
In this case, use [K / L / s / B] to select the
desired item, then press [OK].
7
Press [STOP C ] once to stop
playback temporarily.
Refer to “Resume Playback” on page 21.
To eject the disc:
Press [OPEN / CLOSE A ] to open the disc tray,
then remove the disc before turning off the unit.
Note
may appear at the top-right on the TV screen
when the operation is prohibited by the disc or this
unit.
During the playback of 2-layered disc, pictures may
stop for a moment. This happens when the 1st layer
switches to the 2nd layer. This is not a malfunction.
The operation may vary when you play back
BD-video and DVD-video with disc menu. Refer to
the manual accompanying the disc for details.
•
•
•
Playback
E5E20UD_E5H20UD-NB500MG9_EN.indd20 20E5E20UD_E5H20UD-NB500MG9_EN.indd20 20 2008/02/25 9:30:332008/02/25 9:30:33