Magnavox TR2502C CRT Television User Manual


 
ON
VOL. BAR
EXIT
SETUP
BRIGHTNESS
PICTURE
COLOR
OFF
VOLUME
STATUS/EXIT
CH
CH
POWER
VOL
VOL
MENU
A/CH
MUTE
CC
SLEEP
1
2
3
4
5
6
7
8
9
0
1
2
3
VOL. LIMIT
STATUS/EXIT
CH
CH
POWER
VOL
VOL
MENU
A/CH
MUTE
CC
SLEEP
1
2
3
4
5
6
7
8
9
0
1
2
3
1
ON-SCREEN MENU CONTROLS (CONTINUED)
U
se the Volume Bar con-
trol to see the TV’s vol-
ume level settings on the TV
screen. Once set the Volume
Bar will be seen each time
the VOLUME buttons (on the
TV or remote) are pressed.
VOLUME BAR
Press the MENU (M)
button on the remote, then
press the CH (+) or (–) (or
press the MENU or but-
tons on the TV) to select the
word VOL. BAR with the
TV’s on-screen Arrow.
Press the VOL (+) or (-)
buttons to turn the VOL BAR
control ON or OFF.
Try it out.
Press the VOL (+)
or (–) buttons. The
VOLUME BAR
should appear at the
bottom of the
screen.
NOTE: The TV's
volume level can
also be lowered
when the set is
turned OFF.
SMART
HELP
Press STATUS button to
clear the screen.
VOLUME
BEGIN
SLEEP TIMER :58
15 MIN
SLEEP
CAPTION
VOL. BAR
EXIT
SETUP
BRIGHTNESS
STATUS/EXIT
CH
CH
POWER
VOL
VOL
MENU
A/CH
MUTE
CC
SLEEP
1
2
3
4
5
6
7
8
9
0
2
1
3
H
ave you ever fallen
asleep in front of the TV
only to have it wake you up
at two in the morning with a
test pattern screeching in
your ears? Well, your TV
can save you all that trouble
by automatically turning
itself off.
SLEEP TIMER
Press the SLEEP but-
ton on the remote.
Press the MENU (M) button
on the remote, then press the
CH (+) or (–) (or press the
MENU or buttons on the
TV) to select the word SLEEP
with the TV’s on-screen Arrow.
Press the SLEEP button
repeatedly to pick the amount
of time (15 minutes to 2 hours
ahead) before the TV will turn
itself off.
The VOL (+) or (-) buttons can
also be used to set the amount
of time.
BEGIN
Remember. If
you ever want to see how
many minutes are left
before the TV shuts itself
off, press the STATUS
button on the remote.
If you want to stop a
SLEEP TIMER setting,
reset the timer back to
OFF. You could also turn
the TV off, and then back
on again, to cancel a set-
ting.
Pressing any key on the
remote or TV in the last
60 seconds will cancel the
SLEEP TIMER setting.
SMART
HELP
Press the STATUS button
to clear the screen after you
have set the time for the TV to
turn off.
An on-screen count down will
appear during the last minute
before the TV shuts itself off.
OR
SLEEP
During the last minute of a SLEEP TIMER setting
an on-screen count down will be displayed.
5 - IB7752 E001
Y
ou can limit the maximum
volume level of the TV set.
Once the Volume Limiter con-
trol is set the TV sound can-
not be played louder than the
maximum preset level.
LIMITING THE VOLUME
Press numbers 0, 7, 2,
0, 9, 1; then press MENU (M)
button on the remote or TV.
The VOL. LIMIT bar will
show on the TV screen.
Press the VOLUME (+)
or (–) button until the VOL.
LIMIT bar is at the highest pos-
sible volume.
Remember,
the VOLUME
LIMIT Bar will
appear to return to
the low end of the
register (when the
STATUS button is
pressed to set the
desired maximum
volume level - step #
3). This is normal for
setting the Volume
Limiter. Your new
maximum volume
level has been kept
in memory.
SMART
HELP
Press the STATUS but-
ton to set the maximum vol-
ume level. The screen will
clear and the TV will return to
normal channel viewing.
BEGIN
NOTE: Not all features (and
drawings) discussed in this
section will necessarily
match those found with your
television set. This is normal
and does not require you
contacting your dealer or
requesting service.