Filter
Top Products
Timer Recording (cont’d) 31
6
Repeat steps 1-4 to make sure you have cleared the cor-
rect timer recording.
• CLASH may flash on the screen when
you finish setting a timer recording. This
means that the timer recording you just
programmed and another timer record-
ing overlap. The current timer recording
will not take place. You may choose to
cancel the overlapping timer recording.
• To stop a started timer recording, press
the STOP/EJECT button on the VCR.
• If the power fails for more than one
minute, programmed timer recordings
will be lost. If this occurs, repeat the
steps on pages 11 and 15 before reset-
ting the timer recordings.
• If the preset time for a timer recording
comes up during an OTR, the OTR has
priority. A message will remind you
when the timer recording was scheduled
to begin. You may let the OTR continue;
the timer recording will not take place.
Or, stop the OTR and turn off the VCR
immediately. The timer recording will
take place if you turn off the VCR
before the timer recording’s scheduled
start time.
See page 42 for more hints.
Helpful Hints
1
With the VCR on and in VCR position (the VCR Light will appear
on the display panel), press the MENU button.
Checking or Cancelling Timer Recordings
2
Press the PLAY/o button or the STOP/p button to select
PROGRAM, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to select
PROGRAM REVIEW, then press the F.FWD/B button.
The timer recording information for the program in the lowest
numbered slot will appear on the screen. If no timer recordings
are set, nothing will happen when you press the F.FWD/B button.
4
Press the F.FWD/B button repeatedly to review all pro-
grammed timer recordings. If you don’t press the F.FWD/B
button within 10 seconds, the VCR will automatically display infor-
mation about the next programmed timer recording. This will
continue until all timer recordings have been displayed. Then the
menu will disappear.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
1
2-4
5
POWER EJECTVCR/TV
1 2 3
4 5 6
7 8 9
0
CHANNEL
MEMORY
STATUS/EXIT CLEAR SLOWMENU
REWIND /PLAY F.FWD
REC/OTR PAUSE/STILL
/STOP
TIME SEARCH
SPEED