Magnavox VRC602M VCR User Manual


 
12 Automatic Channel Setup
1
Press the VCR button, then press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
• You can not enter the TUNER SET
UP menu when you are in Line Input
mode (channel 001 or 002). When
you select channel 001 or 002, AV
REAR or AV FRONT will appear on
the TV screen briefly.
• You can not program channels if you
are using a Cable Box or DBS.
• If you have an antenna, channels 2-
69 will be available. If you have a
cable connection, channels 1-125 will
be available.
• You may need to repeat the steps on
this page if a power failure occurs.
Helpful Hints
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you set up the channels again.
2
Press the PLAY/o button or the STOP/p button to select
TUNER SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO ON
2ND AUDIO
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select
AUTO PROGRAMMING, then press the F.FWD/B but-
ton. The VCR distinguishes between TV channels and cable chan-
nels, and the VCR will memorize all the channels you receive.
4
Wait for a few minutes while the VCR sets up the chan-
nels. The channel numbers will appear on the VCR display panel
as they are scanned. When this is complete, CHANNELS ARE SET
will appear on the screen. Then the programming of the lowest
channel number placed in the VCR’s memory will appear on the
screen. Now when you press the CH(annel) o/p buttons, you
will scan only through channels you receive. You may still select
non-memorized channels by pressing the Number buttons.
2-3
1
POWER
EJECT
VCR/TV SPEED
TIME SEARCH
SLOWENTER
1 2 3
4 5 6
7 8 9
0
CH. VOL.
MEMORY ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
VCR CBL/DBSTV
MENU
STATUS/EXIT
CLEAR
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START FINISH