Makita 43901D Flat Panel Television User Manual


 
After use, return the hex wrench to the
storage position.
Switch
action
To prevent the trigger from being acciden-
tally pulled,
a
lock-off lever
is
provided
as
a
safety feature.
To start the tool, slide the lock-off lever
in the direction of the arrow and pull the
trigger.
Release
the trigger to stop.
I
\
Hex
wrench
\
Trigger switch
CAUTION
:
Before inserting the battery cartridge into the tool, always check to
see
that the trigger
switch actuates properly and returns to the
"OFF"
position when released.
Operation
Turn the tool on and wait until the blade attains full speed. Then press the shoe against
the workpiece and apply pressure to cut the workpiece.
CAUTION
:
0
Be sure to wear gloves during operation.
0
Excessive pressure that causes bending or twisting of the blade may snap
it.
8