Filter
Top Products
44
Stop Monitor settings
This function constantly monitors the input signal from the
selected input source while the recorder is stopped.
When the Stop Monitor function is set to On, the level
and level margin of the currently connected input signal is
displayed in the display. Furthermore, audio is output to the
line out jack, speakers, or headphones.
Level meter display
Margin display
< Default value > Preset1 : Off
Preset2 : Off
Preset3 : Off
1 While the recorder is stopped, press the MENU/STORE
button.
2 Turn the JOG to select “Preset” and press the JOG.
3 Turn the JOG to select the preset number that you wish to
set, and press the JOG.
4 Turn the JOG to select “StopMonit” and press the JOG.
5 Turn the JOG to select function On/Off, and press the
JOG.
6 Press the MENU/STORE button to register the settings.
Key lock settings
When the KEYLOCK switch is switched ON, all of the
operating buttons and switches are locked, except for the
LIGHT button.
1 Set the KEYLOCK switch to ON while the recorder is
stopped, paused, recording, or playing back to engage
the key lock.
• If any of the buttons (except for the LIGHT button) are
operated while key lock is engaged, the display shows
“KEY LOCKED”.
2 Return the KEYLOCK switch to OFF to disengage the
key lock.