Marantz PMD930 DVD Player User Manual


 
Quick Installation Guide
Starting Up
Insert disc
INFRARED REMOTE CONTROL
Loading the batteries
1. Open the battery compartment cover.
2. Insert two ‘AAA’ (R03) batteries as indicated inside the battery compartment.
3. Customise your DVD-Video player in the Set-up menu.
4. Close the cover.
Caution
Do not mix old and new batteries and NEVER mix different types of
batteries (standard, alkaline, rechargeables, etc.).
OPERATION
Note
• Unless indicated otherwise, all operations can be performed using the
remote control. Always point the remote control directly at the player, making
sure there are no objects obstructing the path of the infrared beam.
• When there are corresponding keys on the front panel, these can also be used.
SWITCHING ON
1. Switch on the TV and select the video input for your DVD-Video player.
2. 2. To enjoy sound through your stereo system, turn on the system and select
the source input for the DVD-Video player, or: To enjoy DVD-Video with
multichannel (surround) sound, switch on the Home Theatre system and select
the source input for your DVD-Video player.
3. On the front of the DVD-Video player, press ON/OFF. The player display
will light up, and the OSD invites you to insert a disc.
INSERTING A DISC
1. Press Open/Close on the front of the player. The disc tray will open.
2. Put the disc you have selected into the tray, label side up.
Make sure it fits properly into the correct recess.
3. Gently push the tray, or press Open/Close, to close the tray.
• When Autoplay is ON (the factory setting), play starts.
Technical Support
For any technical issues please contact our web site www.marantzpro.com