Filter
Top Products
ENGLISH
2
FUNCTION AND OPERATION
The remote controller is a universal remote controller.
The SOURCE ON/OFF button and control buttons
are used in common across different input source
components.
The input source controlled with the remote controller
changes when one of the input selector buttons is
pressed.
z POWER ON and OFF buttons
(When Zone A/B/C mode is selected)
These buttons are used to turn on or off, for the multi
room control or multi speaker control of Marantz AV
receiver.
(When Zone D mode is selected)
These buttons are used to turn on or off, for the
Marantz AV receiver in main room.
x SOURCE ON and OFF buttons
These buttons are used to turn on or off a specifi c
source (such as a DVD player) independently from
the rest of the system.
c AMP - SOURCE /Numeric buttons
SOURCE buttons
These buttons are used to switch the source of your
A/V Receiver / amplifer. Each time a source button is
pressed, the remote control changes to the source
which was pressed.
This remote controller can control 12 types of
equipment. To change the A/V Receiver / amplifi er
source, press this button twice within two seconds.
The signal is sent when it is pressed the second
time.
(When Zone A/B/C mode is selected)
These buttons are used to select the source for
the multi room/multi speaker control of Marantz AV
receiver.
(When Zone D mode is selected)
These buttons are used to select the source for the
Marantz AV receiver in main room.
Numeric buttons
Use these buttons only for preset setting.
v AMP - VOL +/- buttons
(When Zone A/B/C mode is selected)
These buttons are used to adjust the volume for the
multi room control or multi speaker.
(When Zone D mode is selected)
These buttons are used to adjust the volume for the
Marantz AV receiver in main room.
z
⁄7
⁄6
⁄4
⁄5
⁄3
⁄2
x
c
v
b
n
m
,
.
⁄0
⁄1
b AMP - MUTE button
(When Zone A/B/C mode is selected)
This button is used to mute the audio for the multi
room control or multi speaker control of Marantz AV
receiver.
(When Zone D mode is selected)
These buttons are used to mute the audio for the
Marantz AV receiver in main room.
n 3, 4, 1, 2 (CURSOR) / ENTER
buttons
These buttons are used when operating cursor of a
source.
(When Tuner mode (T1 or T2) mode is selected)
PRESET +/ PRESET - buttons
Used to select a preset station up and down.
TUNE 3 /TUNE 4 buttons
Used to tune a frequency station up and down.
m SLEEP button
(When Zone A/B/C mode is selected)
This button is used for setting the sleep timer of multi
room control mode.
(When Zone D mode is selected)
This button is used for setting the sleep timer of
Marantz AV receiver in main room.
, CONTROL buttons
These buttons are used when operating PLAY, STOP,
PAUSE and other commands of a source.
(When TUNER mode (T1 or T2) is selected)
P.SCAN button
Used to start preset scan.
CLEAR button
Used to stop preset scan.
. A/B/C/D buttons
(When TUNER mode (T1 or T2) is selected)
Used to select the band of tuner (AM/FM/XM/DAB).
(When the other source is selected)
Reserve key for the learning commands.
⁄0 SET button
This button is used to enter learn mode, preset mode
and clone mode.
⁄1 ZONE button
This button is used to set the zone area.
⁄2 DISC+/T.MODE
(When TUNER mode (T1 or T2) is selected)
Used to select auto stereo mode or mono mode
when the FM band is selected.
The “AUTO” indicator lights in the auto stereo mode.
(When CD/DVD/CDR mode is selected)
Used to change the disc for the CD/DVD/CDR
changer.
⁄3 INFO button
(When Zone A/B/C mode is selected)
When this button is pressed, the current setting
for selected multi room control of AV receiver is
displayed on the TV monitor.
(When Zone D mode is selected)
When this button is pressed, the current setting for
AV receiver are displayed on the TV monitor.
⁄4 MENU/INPUT button
(When DVD mode is selected)
Used to menu command.
(When TV mode is selected)
Used to select the TV video input.
⁄5 CH 3/4 buttons
These buttons are used to change channels in TV
mode and DSS mode.
⁄6 SEND indicator
Indicates when the remote controller is transmitting
a signal.
⁄7 LEARN indicator
Indicates when the remote controller is in the LEARN
mode.