Filter
Top Products
1
Product Overview
The V-R1041DP-TE / V-R1042DP-TE is a direct replacement for 8 and 9-inch CRTs used in broadcast and professional video applica-
tions. This cost-effective model features our award-winning all-digital TFT-Megapixel™ LCD panel with 2.4 million pixels, along with
our HyperProcess™ de-interlacing algorithm producing the smoothest motion available on a TFT LCD. Video is scaled to fi t on the
screen in the highest possible resolution utilizing a state-of-the-art LSI with 6x6 pixel interpolation, precision gamma correction, and
Match Color Conversion™ to produce the highest quality images available.
2
Features
2
5
Marshall Electronics
TFT-MegaPixel™ Display
1024x768 Dots (2.4 Million Pixels)
All signals remain completely digital to provide the most exact images available.
SD/HD SDI Input SMPTE 259M-C, 292M / ITU-R BT.601; 1080i/60,59.95,50; 1080psF/24,23.98; 1035i/60, 59.94;
720p/60,59.94,50,30,29.97,25
Durable metal enclosure Protection for all connections and controls with strategically placed ventilation for use in harsh envi-
ronments
Protective Screen Cover Optical grade polycarbonate screen cover with Antirefl ective/Antiglare coating
HyperProcess™ Display interlaced images without smearing or sacrifi cing of temporal resolution with our proprietary
interpolation algorithms. Images are then displayed at a sample rate equal to the frame rate.
MatchColor Conversion™ Factory programmed to closely match typical SMPTE/CIE color metric and color temperature specifi -
cations. This model is adjusted for D-65 color temperature and 72% SMPTE color gamut
OSD On screen display of Format and Ratio
50,000 hour backlight life Backlights are the most common failure on a TFT/LCD monitor. This backlight system has an MTBF
of 5 years and uses specially designed lamps to provide brighter images.
Tally 2 LEDs (Green, Red) per monitor
Articulating Arm V-MG11043 Attach monitor to 1/3” mounting hole
Mount for IDX Batteries V-R65-BA
Use with V-Mount batteries
Sun Hood V-H10M
Use for outdoor viewing or
in brightly-lit areas
Power Adapter Cable V-PAC-D Use with Anton Bauer D-type connection
Power Adapter Cable V-PAC-XLR Use with 4 Pin XLR connections
4
Optional Accessories
3
Standard Accessories
Accessories Supplied with the V-R1041DP-TE / V-R1042DP-TE
• User’s manual
• “Brick” type 12VDC power supply with 2-pin twist-lock connector
210 Plastic Cleaner & Polish and 210 Plus Cleaner
Sumner Laboratories
186 Lincoln Street
Boston, MA 02111
617-542-8656 / Fax: 617-482-9001
20/20 Plastic-Cleaner
Craftics, Inc.
PO Box 91930
Albuquerque, NM 87199
(505) 338-0005
Crystalclean
Discovery Plastics
3700 Western Way, NE
Millersburg, OR 97231
541-926-2900 / Fax: 541-967-8441
www.discoveryplastics.com
Plexus Plastic Cleaner
Plexus
638 Lindero Canyon Rd. #371
Agoura, CA 91301
800-405-6495
Fax: 818-879-0697
Scotch-Brite High Performance Cloth
3M Stationery & Offi ce Supplies Div.
3M Center
St. Paul, MN 55144-1000
877-362-5684
Fax: 651-733-0382
www.mmm.com
NOVUS #1 Plastic Clean and Shine
NOVUS, Inc.
12800 Highway 13 South, Suite 500
Savage, MN 55378
800-548-6872 ext.451
Fax: 952-946-0435
The Simco Industrial Static Control
An Illinois Tool Works Co.
2257 North Penn Road
Hatfi eld, PA 19440-1998
800-203-3419
215-822-2171
Fax: 215-822-3795
www.simco.biz
Exair Corporation
1250 Century Circle North
Cincinnati, OH 45246-3309
513-671-3322
Fax : 513-671-3363
www.exair.com
Recommended Anti-Static Cleaners and Polishes
8
Operational Setup
1. Unpack the V-R1041DP-TE / V-R1042DP-TE and accompanying power supply. Physically inspect for any damage that may
have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-6608. If you are
not located within the continental united states call +1 310-333-0606.
2. The V-R1042DP-TE can be mounted in an standard EIA 19-inch rack. The rack ears on both the V-R1041DP-TE and V-
R1042DP-TE can alternately be used as a table-top stand.
3. Connect required cables for signal input and output. Please note that power must be applied to the V-R1041DP-TE /
V-R1042DP-TE for the video output to be activated. All BNC connectors should be rated for 75Ω.
4. Plug the V-PS12-5V-1 power supply into an A.C. source. Attach the 2-pin twist-lock power connector to the back of the monitor.
Please note that DC power can be supplied directly to the monitor from a variety of sources, such as a battery adapter or vehicle
power. In operation, the V-R1041DP-TE / V-R1042DP-TE will draw approx. 1. amp.
Attach 2-pin twist-lock power connector from VPS12-5V-1 power supply to the back of the unit.
5. Turn on the V-R1041DP-TE / V-R1042DP-TE by pressing the power switch located on the front of the unit.
9
Input Connectors
* Tally lamps active when connected to ground
12VDC Power Input
HDSDI Input/Output
(Active output requires monitor
to be powered)
Tally Pinout (HD-15)
Pin No. Signal
1 Green (Monitor 1)
2 Red (Monitor 1)
3 N/C
4 Ground
5 Ground
6 N/C
7 N/C
8 N/C
9 N/C
10 N/C
11 Green (Monitor 2)
12 Red (Monitor (2)
13 N/C
14 Ground
15 Ground
V-R1041DP-TE / V-R1042DP-TE
V-R1041DP-TE / V-R1042DP-TE
User’s Guide
User’s Guide