2. SETTING UP YOUR DV-66
2.1 How to program the contents to your CompactFlash® card
In order to setup your content to work with the DV-66 you must have a high speed CompactFlash®
media card. To integrate your media content (MPEG-1, MPEG-2, MP3, or JPEGs) you will need to
use a CompactFlash® reader with your computer to load the appropriate files and setup; see
programming below for more details.
Connect your card reader to your PC (note: be sure that the card
reader driver is installed) and insert the Compact FLASH card (we
recommend 128 MB minimum) into the reader. To program your
multimedia content on to the media card, open the file manager and
copy the files to the card reader drive.
The DV-66 utilizes a three-digit numeric ID system for programming
your content tracks, so you will need to number your tracks using
this system; please note that you can keep your track descriptions
as well. There are two types of play modes, MENU and REPEAT,
which determine what number is the first track.
For instance, in the MENU mode the first track is
000, which is the looping track. For the REPEAT
mode the first track is
001.
Menu mode: This is the factory default mode. Track 000 is the looping track for your menu file and it
will continue to play until another track is selected from a push button or touch screen input device.
To switch from Repeat mode back to Menu mode, please depress & hold switch button #1, then plug
in the power until the unit start initialing, then the unit will be setup to play files as “menu mode”.
Switch button #1 can be located either on the touch screen (if used) or on the DV-66K (keypad
controller, sold separately).
Repeat mode: To change to repeat mode, please depress & hold switch button #2 then plug in the
power until the unit start initialing. Repeat mode will play in sequence, one track at a time in numeric
order, and after the last track it will start with track 001 again.
NOTE:
Setup changes will be saved on the flash memory, so the selection made will not change when the power is off.
2