Filter
Top Products
8
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into
the TV's memory. In addition to normal VHF and UHF
channels, this TV can receive up to 113 Cable TV channels.
To use this TV with an antenna, set the TV/CABLE menu
option to the TV setting. When shipped from the factory, this
menu option is in the CABLE setting.
CABLE TV CHART
TV/CABLE SELECTION
Press the MENU button.
Press the
or button to
select “CH SETUP”
, then press the
button.
Press the or button to
select “TV/CABLE”.
Press the
button to select “TV” or
“CABLE” mode. The arrow indicates
the selected mode.
The chart below is typical of many cable system channel
allocations.
NOTE: Contact your cable company to determine the
type of cable system used in your area.
1
2
3
4
5
AUTOMATIC CHANNEL MEMORY
Press the MENU button.
Press the or to select “CH
SETUP”,
then press the button.
Press the or button to
select “AUTO CH MEMORY”, then
press the
button. The TV will begin
memorizing all the channels available
in your area.
TO ADD/DELETE CHANNELS
Press the MENU button.
Press the
or button to
select “CH SETUP”
, then press the
button.
Press the or button to
select “ADD/DELETE”, then press the
button.
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (10 keys,
0-9) or the
or button.
1
2
3
4
1
2
3
4
5
Press the or button to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be blue. Press the
button if
you wish to ADD the unmemorized channel. The
channel indicator will change from blue to pink when a
channel is added and the channel will be memorized.
If a memorized channel was selected (step 4), the
channel indication will be pink.
Press the MENU button after adding or deleting all of
the desired channels, to return to normal TV viewing.
6
Press the or button if you wish to
DELETE the channel from memory.
The channel indicator will change
from pink to blue when a channel is
deleted.
Repeat Steps 4 and 5 for each
channel to be added or deleted.
Press the MENU button to return to normal TV viewing.
Press the MENU button to return to normal TV viewing.
3R70131A-E/P08-13 8/3/04, 9:268