Memorex MT1194 CRT Television User Manual


  Open as PDF
of 5
 
To Audio/Video OUT
(not supplied)
Front of TV
TV GAME
Front of TV
(not supplied)
To AV OUT
jack
(not supplied)
To Audio/
Video OUT
AUDIO
VIDEO
Front of TV
VCR
Press the MENU button.
Press the SET + or – button until the indicator next to "PICTURE" begins to
flash, then press the ENTER button.
Press the ENTER button repeatedly to select the item you want to adjust.
Press the SET + or – button to adjust the setting.
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the TV's memory. In addition to normal
VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu
option is in the CATV setting.
CATV CHART
TV/CATV SELECTION
Press the MENU button.
Press the SET + or – button until the indicator next to "CH SETUP"
begins to flash, then press the ENTER button.
Press the SET + or – button until the indicator next to "TV/CATV"
begins to flash.
Press the ENTER button to select the TV or CATV mode. The arrow
indicates the selected mode.
Press the MENU button twice to return to normal TV viewing.
1
2
3
4
5
The chart below is typical of many cable system channel allocations.
14
A
15
B
16
C
17
D
18
E
19
F
20
G
21
H
22
I
32
S
33
T
34
U
35
V
36
W
37
AA
38
BB
39
CC
40
DD
23
J
24
K
25
L
26
M
27
N
28
O
29
P
30
Q
31
R
50
NN
51
OO
52
PP
53
QQ
54
RR
55
SS
56
TT
57
UU
58
VV
41
EE
42
FF
43
GG
44
HH
45
II
46
JJ
47
KK
48
LL
49
MM
68
III
69
JJJ
70
KKK
71
LLL
72
MMM
73
NNN
74
OOO
75
PPP
76
QQQ
59
WW
60
AAA
61
BBB
62
CCC
63
DDD
64
EEE
65
FFF
66
GGG
67
HHH
86
86
87
87
88
88
89
89
90
90
91
91
92
92
93
93
94
94
77
RRR
78
SSS
79
TTT
80
UUU
81
VVV
82
WWW
83
XXX
84
YYY
85
ZZZ
104
104
105
105
106
106
107
107
108
108
109
109
110
110
111
111
112
112
95
A-5
96
A-4
97
A-3
98
A-2
99
A-1
100
100
101
101
102
102
103
103
122
122
123
123
124
124
125
125
01
5A
113
113
114
114
115
115
116
116
117
117
118
118
119
119
120
120
121
121
Number on this TV
Corresponding CATV channel
NOTE:
Contact your cable company to determine the type of cable system used in your area.
AUTOMATIC CHANNEL MEMORY
Press the MENU button.
Press the SET + or – button until the indicator next to "CH SETUP"
begins to flash, then press the ENTER button.
Press the SET + or – button until the indicator next to "AUTO CH
MEMORY" begins to flash, then press the ENTER button. The TV will
begin memorizing all the channels available in your area. Channel
numbers will remain red until auto memorizing is complete.
Press the MENU button twice to return to normal TV viewing.
1
2
3
1
2
TO ADD/DELETE CHANNELS
Press the MENU button.
Press the SET + or – button until the indicator next to "CH SETUP"
begins to flash, then press the ENTER button.
Press the SET + or – button until the indicator next to "ADD/
DELETE" begins to flash, then press the ENTER button.
Select the desired channels to be added or deleted using the Direct
Channel Selection buttons (10 keys. 0-9), the CH or button
or the SET + or – button.
Press the ENTER button to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the channel
indicator will be red. Press the ENTER button if you wish to ADD the
unmemorized channel. The channel indicator will change from red to
green when a channel is added and the channel will be memorized.
If a memorized channel was selected (step 4), the channel indicator
will be green.
Press the ENTER button if you wish to DELETE the channel from
memory. The channel indicator will change from green to red when a
channel is deleted.
Repeat steps 4 and 5 for each channel to be added or deleted.
Press the MENU button three times after adding or deleting all of the
desired channels, to return to normal TV viewing.
4
5
6
3
ADJUSTING PICTURE
1
2
3
You can adjust the settings for color, sharpness, contrast, brightness and tint.
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode appears on-screen.
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
+
increase brightness
increase contrast
be brilliant color
be greenish color
decrease brightness
decrease contrast
be pale color
be reddish color
makes picture softer
makes picture
clearer
4
CONTRAST COLORBRIGHTNESS TINT SHARPNESS
–
TROUBLESHOOTING GUIDE
SYMPTOMS
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems, tune to another station.
• Check sound adjustments (VOLUME and MUTE).
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to receive desired station.
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
• Adjust antenna.
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another station.
• Check antenna connections, adjust or re-direct antenna.
• Check for sources of possible interference.
TV does not operate.
Poor sound or No sound.
Poor picture or No picture.
Horizontal or diagonal bars
on screen.
• Select proper language in the menu options.
Display is not shown in
your language.
No reception above
channel 13.
No CATV reception.
Picture wobbles or drifts.
Poor color or no color.
Poor reception on some
channels.
• Batteries are weak, dead or inserted incorrectly.
• Remote is out of range, move closer to TV (within 15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the Remote and the TV.
• Make sure the power cord is plugged in.
• Make sure TV/CATV menu option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
•
TV station experiencing problems or program tuned is not closed captioned.
Try another channel.
•
Check CATV connection or VHF/UHF antenna, reposition or rotate antenna.
• Press TV/CAP/TEXT button to turn on the closed caption decoder.
Closed - Caption is not
activated.
Before requesting service, please refer to the following chart for the symptom and possible solution.
No Remote operation.
TV shuts off.
CONNECTION TO OTHER EQUIPMENT
The exact arrangement you use to interconnect various video and audio components to the TV is
dependent on the model and features of each component. Check the Owner's Manual provided with
each component for the location of video and audio inputs and outputs.
The connection diagrams below are offered as suggestions. You may need to modify them to
accommodate your particular assortment of components. The diagrams are intended to show
component video and audio interconnections only.
TV/AV SELECTION
If you connect the TV to a VCR, camcorder or TV
game, through the audio/video in jacks, use the TV/
AV button to make your selection.
Press the TV/AV button repeatedly to select the
desired mode.
"AUX" will display on the screen for 4 seconds.
2. To connect the TV to a TV Game
The TV can also be used as a display device for
many video games. However, due to the wide
variety of different types of signal generated by
these devices and subsequent hook-up variations
required, they have not all been included in the
suggested connection diagrams. You'll need to
consult each component's Owner's Manual for
additional information.
1. To connect the TV to a VCR
3. To connect the TV to a camcorder
To playback from the camcorder, connect the
camcorder to the TV as shown.
4
DEGAUSSING SYSTEM
This television has a degaussing circuit that will clear up color distortions on the TV screen
that are caused by any excess magnetism which happens to get too close to the TV. This
circuit is designed to operate once when the set is first plugged in. If minor color distortions
are seen in some locations on the screen, please unplug the TV for approximately 15
minutes. When the TV is plugged back in, the degaussing circuit will operate once to clear
up any color distortions. Repeat this procedure any time the TV screen is accidentally
magnetized, or when the TV is moved or relocated.
AUTO CH MEMORY
TV
ADD / DELETE
CATV
〈
+
/
–
/ ENTER / MENU
〉
MENU
+
/
–
/ ENTER / MENU
LANGUAGE
CH SETUP
PICTURE
V-CHIP SET
MENU
+
/
–
/ ENTER / MENU
LANGUAGE
CH SETUP
PICTURE
V-CHIP SET
MENU
+
/
–
/ ENTER / MENU
LANGUAGE
CH SETUP
PICTURE
V-CHIP SET
AUTO CH MEMORY
TV
ADD / DELETE
CATV
〈
+
/
–
/ ENTER / MENU
〉
AUTO CH MEMORY
TV
ADD / DELETE
CATV
〈
+
/
–
/ ENTER / MENU
〉
AUX
AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Horizontal resolution:
Audio Power Output Rating:
Speaker:
Tuner Type:
Remote Control:
MT1194
MT1134
120V, 60Hz
54 Watts
IC Solid state
13" (measured diagonally)
260 lines
1.0 Watts
3" Full Range, 8 ohm
181 Channel, Quartz PLL Frequency Synthesized
Infrared, Direct Access, 2 x AAA batteries (not supplied)
VHF 2-13
UHF 14-69
CATV 01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
Remote Control
Telescopic Antenna (MT1134 only)
ACCESSORIES
SPECIFICATIONS
Model
38.6 Ibs
20.9 Ibs
Weight:
Dimensions:
Antenna Input Impedance:
Receiving Channels:
19-3/16" (W) x 18-5/16" (D) x
16-3/8" (H)
14-1/4" (W) x 14-3/16" (D) x
12-5/8" (H)
1.5 Watts
19"
(measured diagonally)
73 Watts
75 Ohm (VHF/UHF/CATV) Coaxial Input
Input:
Video: 1.0 Vp-p 75 ohm
Audio: 300 mV, 47k ohm
3R00601A E 4/1/04, 8:56 PM5
 previous next