Filter
Top Products
Press the OPEN/CLOSE button ❶ to close the disc tray.
“CLOSE” will appear on the screen and in the display. After
loading, “DVD” will appear in the display and the menu
screen of the DVD should appear. Use the Navigation
(➛,❿,,❷) buttons ❷ to select the desired option and
ENTER button ❸ to select it.
If the password is set and the inserted disc is within the
Parental Ratings set, then the Password screen will
appear, prompting you to enter the password.
3
3
1
2
21
DVD BASIC OPERATION
Press the POWER button to turn on the unit. If turned on
with the remote control, the STANDBY indicator will go out.
See important note regarding STANDBY above.
1
Press the OPEN/CLOSE button to open the disc tray,
“OPEN” will appear on the screen and in the display. Insert
a disc will the label side facing up on the disc tray.
To stop playback, press the Stop (■) button ❶; “PRESS
PLAY KEY TO CONTINUE” will appear on the TV screen.
Because the unit will remember where you stopped, simply
press the Play (❿) button ❷ to resume playback where you
left off (resuming playback).
If the Stop (■) button ❶ is pressed twice, the TV screen
shows “STOP” and the unit will stop completely.
4
NOTES:
• If a MENU appears on the TV screen, press the Navigation (➛,❿,,❷) buttons to select the desired option/item, then
press the ENTER button. Please make sure to refer to the disc’s jacket or case of the disc for additional information.
• Resuming playback may not work on all discs.
PLAYBACK OF A DVD
IMPORTANT NOTES:
• When turning the unit on for the first time, press the POWER button on the main unit (not the remote control) to the ON
(in) position. You can then use the remote control to turn the unit off and on, as long as you do not press the POWER
button on the main unit to the OFF (out) position. When the unit is in the Standby mode, the STANDBY indicator will light.
• “ ” will appear on the TV screen during operation if you try to access a function that is not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “NO DISC” will appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side
facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD
player that cannot be used with certain DVDs. There are also extra features on the DVD disc that are different for each
DVD disc, so they are not explained in this owner’s manual.
2
1
2
1
2
1