Filter
Top Products
10
CONNECTION (CONTINUED)
CONNECTING THE DVD TO A TV USING THE Y/PB/PR JACKS
PROGRESSIVE (Y, PB, PR) VIDEO OUT:
Use these jacks to connect to a TV with progressive video input jacks, set the PROGRESSIVE SCAN switch to ON.
Progressive scan is a video scanning system that displays all lines in a frame in one pass, as opposed to the traditional
system, interlaced scan. This connection provides optimum quality. To ensure maximum picture quality, use three video-
grade cables for connections. Note that it is essential to match the color-coded connectors with a compatible TV.
525 LINE DIGITAL PROGRESSIVE-SCAN COMPONENT VIDEO OUTPUT
Compared to standard interlaced video, progressive scan ef
fectively doubles the amount of video information fed to your
TV
or monitor. The result is a stable, flicker-free image. (Check your TV/monitor for compatibility with this feature.)
For the very highest picture quality, try watching a movie on DVD-Video on a progressive-scan compatible TV.
NOTES:
• If you connect a TV that is not compatible with a progressive scan signal and the PROGRESSIVE SCAN switch is in
the ON position, you will not be able to see any picture at all. To regain the picture, you must shut the unit off and set
the PROGRESSIVE SCAN switch to the OFF position. Then, turn the unit on and the picture will appear.
• CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SET THE PROGRESSIVE
SCAN SWITCH TO “OFF”.
Audio Cable (Included)
C
omponent Cable
(Not Included)
From
Component
Video OUT
From
Audio
OUT
To
Audio IN
To
Component
Video IN
Y
P
B
PR
NOTES FOR CONNECTING TO A TV:
• TV must have Y, PB and PR input jacks.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the DVD, refer to the owner’s manual of the TV, as well as this manual.
• When connecting the DVD to the TV, make sure the power is off and both units are unplugged before making any
connections.
• Connect the DVD player to your TV directly. If you connect the DVD player through a VCR, the playback picture will be
distorted because DVD video discs are copy protected.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.