Memorex MVR4041 VCR User Manual


 
16
AUTOMATIC MEMORY TUNING
+
/
/ENTER/MENU
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
TO ADD/DELETE CHANNELS
1
Press the MENU button.
Press the TRACKING/SET +
or button to select the CH
SET UP option, then press the
ENTER button.
2 Press the TRACKING/SET + or
button to select the ADD/DE-
LETE mode, then press the
ENTER button.
3 Select the desired channels to
be added or deleted using the
TRACKING/SET + or button.
4 Press the ENTER button if you
wish to DELETE the channel
from memory.
Press the ENTER button if
you wish to ADD the
unmemorized channel.
Repeat Steps 3 and 4 for each channel to be added
or deleted.
5 Press the MENU button three times after adding or
deleting all of the desired channels, to return to
normal TV viewing.
When you don't want to receive a weak signal
broadcast, the Blue back screen can be obtained by
selecting the NO NOISE BACKGROUND "ON". When
the unit is shipped from the factory, the NO NOISE
BACKGROUND is set to the "ON".
CHECK BEFORE YOU BEGIN
Turn ON the TV and set to the video channel 3 or 4.
Turn ON the VCR POWER button.
Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
+
/
/ENTER/MENU
ADD CH 002
+//ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
ON OFF
ON OFF
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
+//ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
ON OFF
ON OFF
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
+//ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
ON OFF
ON OFF
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
CHECK BEFORE YOU BEGIN
Turn ON the TV and set to the video channel 3 or 4.
Turn ON the VCR POWER button.
Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on, and select the video input mode
on the TV.
+
/
/ENTER/MENU
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
1 Press the MENU button.
Press the TRACKING/SET +
or button to select the CH
SET UP option, then press
the ENTER button.
2 Press the TRACKING/SET +
or button to select the
AUTO CH MEMORY mode,
then press the ENTER button.
3 The auto tuning will start. The
channel display will count up
and when finished, the screen
returns to normal. Channel
numbers will remain red until
auto memorizing is complete.
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
SETTING THE CHANNELS
1 Press the MENU button.
2 Press the TRACKING/SET +
or button to select the CH
SET UP option, then press the
ENTER button.
3 Press the TRACKING/SET +
or button to select the TV/
CATV mode.
4 Press the ENTER button to
select the TV or CATV mode.
The arrow indicates the
selected mode.
5 Press the MENU button twice to return to normal TV
viewing.
TV/CATV SELECTION
+
/
/ENTER/MENU
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
CH 001
This VCR is equipped with a channel memory feature
which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the VCRs memory. In addition to
normal VHF and UHF channels, this VCR can receive
up to 113 Cable TV channels. To use this VCR with an
antenna, set the TV/CATV menu option to the TV mode.
When shipped from the factory, this menu option is in
the CATV mode.
+//ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
ON OFF
ON OFF
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
+//ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
ON OFF
ON OFF
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
ON OFF
NO NOISE BACKGROUND
NOISE ELIMINATION
1 Press the MENU button, then
press the TRACKING/SET + or
button to select the NO
NOISE BACKGROUND option.
2 Press the ENTER button to
select the ON position.
3 Press the MENU button again.
TV - VHF/UHF channels
CATV - CABLE TV channels
4E40401A E P14-19 4/1/01, 5:03 PM16