Filter
Top Products
4
Replacing the battery
The battery that is used in the
OESWC-RF is a CR2032.
To replace it please follow the
instructions below.
1. Remove the OESWC-RF
from the steering wheel
by removing the Phillips
screw from the back of the
OESWC-RF and undoing the
strap. (g 1)
2. Remove the two Phillips
screws that secure the
OESWC-RF together. (g 2)
3. Unclip and remove the back
cover by sliding the cover
towards the outside of the
OESWC-RF.(g 3)
4. Remove the board and
replace the battery. (g 4)
5. Reassemble the OESWC-RF
1
2
3
4