Metz 72TK79 Kreta-72 Flat Panel Television User Manual


 
50
24. Initial programme position
You can define a so-called initial programme
position in this TV set. This is intended primarily
to enable you to switch to the AV programme
position when you are using an external SAT
receiver.
Setting the initial programme position
In a menu with two asterisks (**), the set-
tings for this menu item cannot be chan-
ged.
In the menu „AV devices“ (see also sec-
tion 22, „AV devices“), select and con-
nect a SAT receiver (SAT/SetTop).
• Press the „AV“ key.
• In the „AV playback menu“, use the
numeric keys to select the position
„SAT/SetTop“.
• Press the „MENU“ key to open the TV
menu.
• Press the red key to open the menu
„Configuration“.
• Use the cursor control key to select „Operation“
and then „Initial programme position“.
• Press the „OK“ key and then, in the setting win-
dow, use the
-
+
key to select „Yes“.
• Press the „OK“ key to save the new setting.
After this, the AV programme position will
be selected automatically if you switch
your TV set on with the main switch and
then press the key on the remote con-
trol unit.
2) Available only on TV sets which are equipped
with this option.
Call the menu
OK
OK
MENU
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
Operation
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Language*
Switch on with this station? Yes
Picture-Volume
AV devices
Station table
Timer
EPG settings
Automatic zoom
Init. prog. position
Display configuration
TV-Menü
Configuration
: select menu
item
  