Metz Astral-63 Flat Panel Television User Manual


 
21
11. Picture settings, general Call the menu
In a menu with two asterisks (**), the set-
tings for certain menu items cannot be
changed.
Panorama
2)
function
This setting can be made only on 16:9 TV
sets.
The panorama function can be used to expand
"normal" programmes in 4:3 format to the 16:9
format. This is done by increasing the width of the
picture to fill the complete width of the screen.
Setting Panorama
2)
mode:
• Press the "MENU" key to open the TV
menu.
• Press the "OK" key to open the menu
"Picture and sound".
• Use the cursor control key to select
"Panorama".
• Press the "OK" key and then, in the
setting window, use the
-
+
key to
change the setting for "Panorama".
• Use the cursor control key to select the menu
item "Mode" and use the
-
+
key to select either
"linear" or "non-linear".
• Press the "OK" key to save your changes.
The picture shows the factory setting.
• Press the "TV" key to close the TV menu.
The functions "Panorama
2)
" and "Zoom"
can also be used together.
2) Available only on TV sets which are equipped
with this option.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
MENU
OK
OK
OK
Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.
Panorama On,zoom 1 Mode Non-linear
: select
menu item
AV devices
Station table
Timer
Configuration
Rotation
2)
*
Picture pos., vertica
Panorama
2)
*
CTI*
Comb filter*
Noise reduction*
Picture sharpness*
Colour intensity
Contrast
TV-Menü
Picture-Volume
  