Metz Elba 63 TD 61 - 100 MT, Hawaii 70 TD 64 - 100 MT, Linea-SF 72 TD 66 - 100 MT, Linea deluxe-SF 72 TD 67 - 100 MT, Gemini-SF 82 TE 93 - 100 MT, Morea-S 70 TE 65 - 100 MT Flat Panel Television User Manual


 
44
12. Operation without remote control
Programme selection:
Press the - P + keys.
Volume:
Hold down the preselect key until the bar display for the volume
appears on the screen. Now press the - P + keys to adjust the
volume.
Contrast:
Hold down the preselect key until the bar display for contrast
appears on the screen. Then press the - P + keys to adjust the
contrast.
This mode is only intended for an emergency when the battery in
the remote control handset is flat, or if the remote control is not
available.
The TV controls are underneath a cover at the front of the set.
You can control the following functions on the TV without the
remote control handset. The preselection of the function is valid
for 10 seconds, only 5 of which are shown in the permanent dis-
play.
1. Ajustar el valor gris del
margen
OK
P
+
+
-
AV
--/-
-
P
123
456
789
0
A
B
TV
?
MENU
Equipm. configuration
698-05S-GB
?
MENU
return Help
TV
picture
store ?
OK
white
yellow
blue
REC
Ȅ
red
Prog. change settings
RGB priority:
Sound settings:
Side bar value:
yes
yes
3
-
+
11. Supplement to Equipment Configuration
(only Gemini)
Grey value of side bars
MENU
red
3 x
OK
TV
Grey value of side bars:
When "normal" 4:3 format programmes are being received, grey bars appear at the left and right sides of the
screen. The tonal value of these side bars can be adjusted in steps from 0 to 6, where 0 is black and 6 is light grey.
Press this key on the remote
control....
The screen displays Explanation
The grey value of the side bars on the screen
(during reception of a programme in 4:3 format)
can be adjusted with the keys.
This setting applies to all programme positions.
+
-