Filter
Top Products
ADJUSTMENTS
WARNING: SHUT OFFAND LOCK OUTPOWER BEFORE CLEANING, ADJUSTING,LUBRICATING OR
SERVICINGTHIS MACHINE. FAILURETO HEED MAY RESULTIN SERIOUS PERSONAL INJURYOR DEATH.
Correct tension on the apron chains is when the
apron chain slat is 1/8” to 1/4” off the return slides (three
feet from the front of the box). To tighten chains, tighten
the adjuster bolts at each end of the front sprocket
shafts. Each apron chain has its own sprocket shaft.
Tighten the adjuster bolts at each end of the shaft
equally.
The roller chain drives are tensioned by automatic spring
loaded tension blocks. Periodically eye bolts will need to
be adjusted to maintain proper spring tension. Springs
should be stretched to obtain approximately 1/16” gap
between windings.
8100 Rear Unload --15--
ADJUSTMENT DIAGRAM
BOTH SIDES
Front Shields Removed To Illustrate Service Components.
Do Not Remove This Shield To Perform The Service.