MicroBoards Technology QD-2 DVD Recorder User Manual


 
15
The Setup menu includes many setting the user can select to customize the use of the QD-52
duplicator. Here is a description of the options in the setup menu. Please refer to the chart on
page 15 for the location and options of these settings.
Language
The QD-52 duplicator has two language options, English and Spanish. English is the default
setting.
CD Burn Speed
The default record speed for the QD-52 is Maximum (52x). The other record speed options are:
48x, 40x, 32x, 24x, 16x, 12x, 10x, 8x and 4x.
NOTE: 12x is currently the minimum burn speed. Selecting lower speeds will not reduce
the burn speed below 12x.
Read Speed
The default read speed for the QD-52 is Maximum (52x). The other read speed options are:
48x, 40x, 32x, 16x and 8x.
Auto Start Drive
The Auto Start Drive is used to automatically start recording, once the master disc and blank disc
are inserted into the drives.
There are 3 options for this setting, Off, 1 and 2. To use this feature, change the value from OFF
to 1. The 2 setting is not used. Once the value is set to 1, the system will automatically start
recording once a master and blank disc are detected.
Startup Menu
The Startup Menu selection allows you to select the main menu item that appears when the QD-
52 duplicator starts up. The default setting is 1. Copy. Any of the 10 menu items can be
selected.
Auto Verify
The Auto Verify function can be turned On if you wish to verify every copy you make with the QD-
52 duplicator. The verify function checks the copied disc, to see if it can be read. It does not
compare the copy with the master disc.
The default setting is Off.
Auto Compare
The Auto Compare function can be turned On if you wish to Compare every copy with the master
disc. The Compare function only works with Data master discs. If there is audio or video on the
master disc, the Compare function will not work.
The default setting is Off.
Auto Prescan
The Auto Prescan function can be turned On if you with to Prescan every master disc before
recording.
The default setting is Off.