Filter
Top Products
Connecting
your TV
12
(E)27HL85
IN from ANT OUT to TV
VIDEO AUDIO
LR
IN
OUT
CH 3
CH 4
VIDEO
OUT
S-VIDEO
AUDIO
COMPONENT VIDEO
OUT
L
R
L
R
P
R
P
B
Y
Connecting a DVD player with ColorStream
®
(component video) and a VCR
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs.
Your TV has ColorStream
®
(component video) inputs. Connecting
your TV to a DVD player with component video (such as a Toshiba
DVD player with ColorStream
®
) can greatly enhance picture quality
and realism.
–To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
–To record a TV program while watching a DVD, tune the VCR to
the channel to record, and select ColorStream HD on the TV (see
“Selecting the video input source” on page 44).
You will need:
• two coaxial cables
• one set of standard A/V cables
• one pair of standard audio cables
• one set of component video cables
DVD player with component video
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Note:
For the highest possible picture quality, use
component video cables (or an HDMI cable)
between the TV and DVD player.
You can connect the component video cables
to either set of ColorStream inputs on the TV.
For HDMI or DVI connection, see page 15.
The ColorStream HD and HDMI input can be
used with Progressive (480p, 720p) and
Interlaced (480i, 1080i) scan systems;
however, a 1080i signal will provide the best
picture performance.
If your DVD player is not compatible with
component video, HDMI, or DVI, use the
S-video connections (plus the standard audio
connections) instead (see page 11).
Stereo VCR
From
Antenna
TV
TV
#01E09-15_27HL85 3/16/05, 9:20 PM12
Black