Mitsubishi Electronics 265 Series Flat Panel Television User Manual


  Open as PDF
of 104
 
90 Appendices
For assistance call 1(800) 332-2119
Appendix E: Troubleshooting, continued
Sound
Symptom Remarks
1. There is no sound even when the
volume is turned up.
• Checkifthe
MUTE
key is on.
• TheTV’sanalog
Listen to
setting may be set to SAP (analog
program from the ANT input) but no SAP is being broadcast.
• CheckthattheSound > Audio > TV Speakers option is set to
On
to hear sound from the TV speakers. Possibly the
TV Speakers
option is
Off
or set to
Center
but there is no A/V receiver con-
nected.
• IfusinganA/Vreceiver,checkthattheSound > Audio > TV
Speakers option is set to
Off
to hear sound from the A/V receiver
speakers.
•
Press and hold the
POWER
button on the control panel for 10
seconds to perform System Reset.
•
The language selected in the Setup > Antenna Digital Audio
menu is not being broadcast for the current program.
2. The sound does not match the screen
picture.
The TV’s analog
Listen to
setting
may be set to SAP
(analog program
from the ANT input)
.
3. The sound from my A/V receiver does
not match the screen picture (I should
hear the correct audio from my A/V
receiver).
Check that •
DIGITAL AUDIO OUTPUT
and/or
AVR/SURROUND
OUTPUT
on TV’s connection panel is connected to the A/V
receiver.
Without this connection, devices connected only to the TV (and
not the A/V receiver) can be heard only from the TV speakers.
Note that this includes the
ANT
input, a device (such as a
camcorder) connected to the TV, and any other device sending
audio to the TV only.
If using a NetCommand-controlled A/V receiver, NetCommand •
may be selecting the wrong A/V receiver audio input. Check the
A/V receiver’s NetCommand setup in the Inputs > AVR menu.
4. Cannot select an audio-only device; it
does not appear in the Input Selection
menu.
Plug an unused video plug into the
Y/VIDEO
jack to activate Auto
Input Sensing. Assign the name CD/Audio or MP3 to make the
audio device selectable in the Input Selection menu.
.5. Sound is coming from the TV speakers
instead of the A/V receiver.
Connect the TV’s •
AUDIO OUT
to the A/V receiver.
Change TV Speakers setting to • Off or Center.
Downloaded From TV-Manual.com Manuals
 previous next