Filter
Top Products
Xpand Universal 3D glasses (X103)
Quick-Install user guide
Getting started.
What is included:
- One (1) pair of 3D glasses
- One (1) cloth bag
- Three (3) Nosepieces
- Two (2) Extra CR2032 batteries.
Compatibility:
Active 3D ready TV sets, Xpand cinema. For updated list; check regulary at
www.xpandcinema.com/3dtv
Warranty
1-year limited product repair / replacement warranty. For detailed warranty statement visit
www.xpandcinema.com
Functionality
Glasses Overview
(1) Button (On, Off, TV selection)
(2) LED light.
TV Manufacturer Codes
Samsung or Mitsubishi One blink
LG Two blinks
Sony Three Blinks
Panasonic and Toshiba Four Blinks
Philips Five Blinks
Xpand Emitter Six Blinks
Sony Laptops Three Blinks
HP laptops Five Blinks
JVC LCOS projector Five Blinks
* some TV models require the use of external emitter, please check with your TV manufacturer.
If you do not see your TV manufacturer listed go to www.xpandcinema.com/3dtv for a complete list
Turning On/Off your glasses
- Step 1 ON: Press button (1) once
- Step 2 LED light (2) will ramp from off to bright.
- Step 3 OFF: Press button (1) once
- Step 4 LED light (2) will ramp from bright to off
Select TV
- Step 1 While the glasses are on, press and hold the button (1) for 3 seconds.
- Step 2 LED light (2) will blink once, corresponding to a Samsung TV (See TV manufacturer
codes above)
- Step 3 Press button once to step through the other TV options until you get to your TV
manufacturer.
- Step 4 If you have selected the correct TV manufacturer than sit back and enjoy your
program. Within 30 seconds the glasses will exit the programming mode and store your
selection in memory. The glasses will always start up in this mode the next time you turn the
glasses on.
Set glasses for use in XPAND equipped cinemas
- Step 1 On: Press and hold button (1) for 3 seconds.
- Step 2 LED light (2) will blink 3 times.
- Step 3 OFF: Press button (1) once.
- Step 4 LED light (2) will ramp from bright to off.