Filter
Top Products
59
CHAPTER 5 SYSTEM CONFIGURATION
5
(b) Mounting to a head module
(2) Optional products
The following optional products can be used for easy wiring of modules.
(a) Display unit
This unit has a liquid crystal display and can be attached to the CPU module. When attaching it to the CPU
module, It enables confirmation of system conditions and changing system settings without GX Works2 or GX
Developer.
For the details, refer to the following.
MELSEC-L CPU Module User's Manual (Hardware Design, Maintenance and Inspection)
(b) Connector/terminal block converter module and dedicated cable with connector
These are used for easy wiring from connector type I/O module to terminal for external wiring. ( Page 81,
Appendix 1)
(c) Relay terminal module and dedicated cable with connector
These are used in place of joint terminal blocks and in-panel relays to reduce wiring work processes for them
and programmable controllers.
For details on the relay terminal module and the dedicated cable with connector, refer to the following.
Relay Terminal Module User's Manual (Hardware) A6TE2-16SRN
Power supply module CPU module I/O module
Connector/terminal block converter module
(optional)
END cover
Dedicated cable with connector
(relay terminal module)
(optional)
Relay terminal module
(optional)
Dedicated cable with connector
(connector/terminal block converter module)
(optional)
Connector