Mitsubishi Electronics WS-65311 Projection Television User Manual


 
14
14
PIP/POP
Main
Ant-A
Ant-B
DTV
480i, 480p, 1080i
Input-1
Input-2
Input-3
Component-1
(Component-2)
480i, 480p,1080i
Ant-A
Ant-B
DTV
480i, 480p,
1080i
Input-1
Input-2
Input-3
Component-1
(Component-2)
480i, 480p,1080i
OK*
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
No PIP/POP
OK*
OK**
OK**
OK**
How Connections Affect the PIP and POP
How Connections Affect the PIP and POP
To see a picture in the PIP or POP, you may
need to select an input source. If the only
input connected is ANT-A, then both the main
picture and the PIP/POP will be from that input
source. If other video equipment is connected,
you may be able to view these input sources
as the PIP/POP. When connecting your new
Mitsubishi bigscreen, it is important to
understand which main picture and PIP/POP
input sources can and cannot be used together.
Table 1 shows which inputs can and cannot be
used together and the limitations they may have.
If you press the INFO key it will display the
current Input, signal (480i, 480p, or 1080i),
format, time, day and sleep time.
See Operation of PIP and POP, pages 58-62,
for operating instructions.
Table 1. *No Side-by-Side with the same
channel.
**No Side-by Side with the same input.
How Connections Affect the System 4 Home Theater IR Control
(Applicable for WS-55411, WS-65411 and WS-73411 only.)
The Mitsubishi System 4 Home Theater IR
Control is a special feature that makes it easier
to use your TV with a digital surround sound
A/V receiver. Once your equipment is properly
connected and set up, your TV and digital A/V
receiver will change inputs together to match
high resolution pictures with the proper
surround sound.
When you change inputs on your TV to watch
different video products, your TV will send
signals via your remote control and the infrared
emitters to your digital A/V receiver to change
inputs.
You will automatically hear the high quality
digital surround sound from digital products
like your DTV receiver and DVD player,
and high quality analog stereo or surround
sound from non-digital products like your
VCR.
Additionally, all IR remote signals from your
Mitsubishi remote or other manufacturer’s
remote will be passed through your TV to
your A/V devices. Your A/V devices can
be hidden or behind cabinet doors and
controlled by pointing the remote at the TV.