Filter
Top Products
54
55
AUDIO/VIDEO SETTINGS Menu: Overview
AUDIO/VIDEO SETTINGS
Menu
(Figure 53)
Each input has its own A/V memory. You can adjust
each input’s A/V memory in two ways. You can use
the menu or the remote control.
A/V Memory Reset
A/V Memory Reset will return the currently selected
input’s A/V memory to the factory settings. To reset
an input’s A/V memory, select A/V Memory Reset,
select the input you want to reset, and press ENTER.
TV Speakers
This selection will turn on or off the TV’s internal
speakers. You may select Off when sending the sound
through a separate stereo system or surround sound
A/V receiver.
Audio Output
Select Fixed if your audio receiver or stereo system can
be controlled with a remote. This allows you to adjust
the volume with the system’s remote control or the TV
remote control, if compatible. This setting is better
for surround sound receivers. Select Variable if your
audio receiver or stereo system cannot be controlled
with a remote. This allows the TV’s internal circuitry
to adjust the volume.
AUDIO SETTINGS and
VIDEO SETTINGS
(Audio Settings, Figure 54)
After selecting AUDIO SETTINGS or VIDEO
SETTINGS, you can adjust the settings by pressing
, , , or . For descriptions of the individual A/V
settings, see AUDIO/VIDEO Setting Descriptions,
pages -.
Using the AUDIO and VIDEO Buttons on the Remote Control
1. Press AUDIO or VIDEO to cycle through the available settings.
2. Press or to adjust the setting. After 5 seconds of inactivity, the setting display will disappear.
ENTER for menu or to start
MENU to return
Figure 53. AUDIO/VIDEO SETTINGS menu
ENTER for menu or to start
MENU to return
Figure 54. AUDIO SETTINGS