Filter
Top Products
- 60 -
U s e r M a n u a l D r e a m b o x D M 7 0 2 5 english
Use the Navigation-Buttons and the Numeric-Keypad to change the values.
Use DHCP:
If enabled your Dreambox will get its IP from a DHCP server. Disable this option to set a static IP
address.
IP Address:
Enter the IP address here.
Netmask:
Enter the subnet mask (Usually 255.255.255.0).
Gateway:
Enter the router’s IP address here, if the Dreambox is connected to the Internet over a router.
Nameserver:
Enter the DNS-Server’s IP address here. DNS is used to translate a Domain name to an IP address.
Normally, if the Type is set to LAN, there is no need for a DNS entry. If the Dreambox is connected to
the Internet over a router, enter the router’s IP address here.
Activate the network:
Press the OK-Button to save the setting and activate the network.
Attention:
If you are using a DHCP server in your LAN,
configure the DHCP server so it does not
assign the IP address used by the Dreambox.
Otherwise an IP address collision is possible.
Refer to the DHCP server’s manual about how
to configure a DHCP address pool.