Mitsumi electronic LDT322V Flat Panel Television User Manual


 
No Sound
Check to see if speaker cable is properly connected.
Check to see if mute is activated.
Check to see if volume is set at minimum.
Remote Control is not available
Check the Remote Control’s batteries status.
Check if batteries are inserted correctly.
Check if the Remote Control is pointing at the monitor’s remote sensor.
“SCHEDULE”/“OFF TIMER” function is not working properly
The “SCHEDULE” function will be disabled when the “OFF TIMER” is set.
If the “OFF TIMER” function is enable and the power to the LCD monitor is turned off if the power supply is interrupted
unexpectedly, then the “OFF TIMER” will be reset.
Stripe Noise
Either light vertical or horizontal stripes may appear, depending on the speci c display pattern. This is no product fault or
degradation.
1-37
Downloaded From TV-Manual.com Manuals