Mitsumi electronic WD-57734 Flat Panel Television User Manual


 
6. NetCommand 51
Key Name in
Learning Screen
Special Operation Description and Setup How to Use
Power On Manual Power On/Off
Usefordevicesthathaveonlyone
POWER
key.
1. Press
INPUT
todisplaytheInput Selection
menu.
2. Press tohighlighttheiconforthe
devicetobepoweredonoroff.
3. WiththeInput Selectionmenustilldisplayed,
press
POWER
tosendthepowersignal;youmay
needtopress
POWER
twice.
Note:Ifyoupress
POWER
withouttheInput
Selectiondisplayed,theTVwillturnoff.
4. Press
ENTER
toswitchtheTVtothedevice.
Power On
Power Off
Automatic Power On/Off
Thisfeatureisonlyfordevicesthathaveseparate
POWER ON
and
POWER OFF
keysontheiroriginalremote
controls.Ifyourdevicedoesnothaveaseparate
POWER OFF
key,donotusethePower Offlearn-
ingposition;useonlytheManualPowerON/OFF
methoddescribedabove.
IntheNetCommandLearnscreen:
a. “Learn”thePower OncommandinthePower
Onlearningposition.
b. “Learn”thePower Offcommandinthe
Power Offlearningposition.
• To Power On the Device
1. Press
INPUT
todisplaytheInput Selection
menu.
2. Press tohighlighttheiconforthe
devicetobepoweredonoroff.
3. Press
ENTER
toswitchtheTVtothedevice
andNetCommandwillsendthePower On
commandtothedevice.
• To Power Off the Device
WhenyouturntheTVoff,theTVsendsall
learnedPower Offcommandstoalldevices.
Menu Displaying Device Setup Menus 1. Whilewatchingadevice,press
INPUT
todisplay
theInput Selectionmenuwiththedeviceicon
highlighted.
2. Press
MENU
tosendthemenusignaltothe
device.TheInput Selectionmenuwillauto-
maticallyclearfromthescreen.
Special Operation Methods
Operating NetCommand-Controlled Devices
To Control an A/V Receiver
Switching Audio to and from the A/V Receiver
1. Press
AUDIO.
2. Press toshowtheSpeakersoption.
3. Press toselecteitherAV ReceiverorTV.
Controlling A/V Receiver Power
1. Press
AUDIO.
2. Press toshowtheSpeakersoption.
3. Press toselectAV Receiver.
4. PointtheremotecontrolattheTV(nottheA/V
receiver)andpress
POWER
topowertheA/Vreceiver
onoroff.
Controlling Other A/V Receiver Functions
WiththeA/Vreceiverpoweredonandselected,the
TV’sremoteoperatesthevolumeandmutefunctions.
Also,whenyouswitchtoadeviceintheInput Selec-
tionmenu,theA/Vreceiverautomaticallyswitchesto
thecorrectaudioinputforthedevice.
To Control Most Device Types
AsanexampleofNetCommandcontrol,ifyouare
watchingyourcableboxandyouwishtotunetothe
nextchannelhigher,press
CH/PAGE
.NetCommand
thensendsthe“learned”channel-upcontrolsignalto
thecablebox.
1. WithanIRemitterproperlypositionedinfrontofthe
device,usetheInputs > Learnscreentoperform
NetCommandsetupforthedevice.
2. Whenyouwishtousethedevice,press
INPUT
to
displaytheInput Selectionmenu.
3. Press tohighlighttheiconforthedevice.
4. Press
ENTER
toswitchtheTVtothedevice.
Note:
ifyouhavesetupautomaticinputswitching
fortheA/Vreceiver,theA/Vreceiverwillautomatically
switchtothecorrectinputforthedevice.
5. TooperatethedeviceusingtheTV’sremote
control,settheslideswitchtothe
TV
position.
6. PointtheremotecontrolattheTV(notthedevice)
andpressthekeyforthedesiredfunction.