Filter
Top Products
17
25 CLEAR - Press to clear a numeric entry
26 ENTER - Press to select an option or execute a command
TV Control - These buttons control the volume control part of the Player.
Press FUNC to select the TV for remote control operation
VOLUME UP AND DOWN – These buttons adjust the main volume control, changing all the channels at the same time. Can be
activated on the front panel or remote. They are also used to adjust the trim levels while in the setup mode. Each button click is
1db change. Each LED is 5 db so the button must be pressed 5 times to see an LED change. Holding the button continuously
steps the volume.
27 MODE (FUNC) – This button places the MVC in the setup mode. The red Setup LED turns on when in this mode. In the setup
mode, the first channel, the LF channel is indicated by the farthest left LED being lit. The trim level is also indicated starting at the
13th LED from the LEFT. 8 LEDs worth of trim can be adjusted for each channel using the volume up / down buttons. Pressing
the button again shifts to the C channel, the second LED is now lit and again, the level is indicated. The process is repeated 8
times until all channels are set. The unit is back in the normal mode and the new trim settings will be remembered until changed.
To reset all trims, hold setup and mute together for 15 seconds.
28 MUTE (O) – Mutes the audio outputs of all channels immediately. Can be activated on the front panel or remote. Causes the
volume indication LED to blink fast, and allows the volume to be adjusted up and down quickly. A second press releases the mute
mode.