CHECKING CODE-LIBRARY NUMBER
You can check the current code-library on any DEVICE
SELECTOR key as follows. Enter Library Mode by simultaneously
pressing-and-holding for 3 seconds both the desired
component’s DEVICE SELECTOR key and the [AVPS] key, until
the Learn LED turns green. Press the [DISP] key; the HTR 3
indicates the current code-library by ashing its [CUSTOM],
[VCR], and [MACRO] keys.
For example, to indicate code-library #501, the HTR 3 will ash
[CUSTOM] 5 times, pause, and then ash [MACRO] once. You might
wish to make a note of your components’ code-library numbers.
SUMMARY OF THE HTR 3 MODES
Mode Keys To Press (for 3 seconds)
Learn/Copy/Punch Through Device Key + RES Key
Delete Mode Device Key + RTN Key
Macro Record Macro Key + Function Key
Library Mode Device Key + AVPS Key
Back Light Timeout DISP Key + Digit Key
Factory Reset See “Factory Reset” above
9
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
HTR3_eng_OM_v02.indd 9 7/8/07 22:03:27