NAD T515 DVD Player User Manual


 
8
Introduction
ENGLISH FRANÇAIS
DEUTSCH
NEDERLANDS
ESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
REAR PANEL
OPTICAL (TOS link)
Connect to digital
audio equipment.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial)
audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
HDMI OUT
HDMI output providing a high quality
interface for digital audio and video.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
Connect to a TV with Y Cb/Pb Cr/Pr inputs.
AC Power Cord
Plug into the power source.
VIDEO OUT
Connect to a TV
with video inputs.
SCART/RGB OUT
Connect to a TV with SCART jack.
IR IN
By connecting this DVD player to another NAD audio
component or system controller equipped with an IR
output, you can remotely operate the T515.
COAXIAL (Digital audio out jack)
Connect to digital (coaxial)
audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
VIDEO OUT
Connect to a TV
with video inputs.
AC Power Cord
Plug into the power source.
S-VIDEO OUT (North American-version only)
Connect to a TV with S-Video inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
Connect to a TV with Y Cb/Pb Cr/Pr inputs.
SCART/RGB OUT
Connect to a TV with SCART jack.
OPTICAL (TOS link)
Connect to digital
audio equipment.
HDMI OUT
HDMI output providing a high quality
interface for digital audio and video.
EUROPEAN
230 VOLT
VERSION ONLY
IR IN
By connecting this DVD player to another
NAD audio component or system
controller equipped with an IR output,
you can remotely operate the T515.
T515_NAD_English_Final.qxd 5/7/06 11:46 AM Page 8