Filter
Top Products
28
ENGLISH FRANÇAIS
DEUTSCH
NEDERLANDS
ESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
Operation
This chapter includes important reference information to help you set
your DVD player.
SPEAKER SETUP
Make the following settings for the built-in 5.1 channel surround
decoder.
1 Press SETUP. The setup menu appears.
2 Use to select the AUDIO option then press 4 to move to the
second level.
3 Use to select the Speaker Setup option then press to move
to the third level. “Select” is highlighted.
4 Press ENTER and the 5.1 Speaker Setup menu appears.
5 Use to select the desired speaker.
6 Adjust options using buttons.
7 Press ENTER to confirm your selection. Returns to the previous
menu.
SPEAKER SELECTION
Select a speaker that you want to adjust. (Front speakers (Left), Centre
Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers
(Left), or SubWoofer).
SIZE
Press to set a mode. (Large, Small or None)
If you have connected the system to a speaker with a low frequency of
100 Hz or below, select “Large.”
If you have connected the system to a speaker without a low frequency
of 100 Hz or below, select
“Small.” If you have not connected a subwoofer, always select “Large”
for Front speakers (L/R).
When you do not have a certain speaker connected, select “None.”
Front L/R speaker’s size can be set to “Large” or “Small.”
If Front L/R speaker’s size is set to “Small,” Rear and Centre speaker’s
size can be set to “Small” or “None.”
Subwoofer’s size can be set only to “Large” or “None”.
VOLUME
Press to adjust the output level of the selected speaker.
(-10dB - 0dB)
DISTANCE
If you connected speakers to your DVD Player, setting the Distance lets
the speakers know how far the sound has to travel to reach your set
listening point. This allows the sound from each speaker to reach the
listener at the same time.
Press to adjust the Distance of the selected speaker.
[0.3(1)m(ft) - 6.0(20)m(ft)]
TEST
Press to test the signals of each speaker. Adjust the volume to
match the volume of test signals memorized in the system.
Front Left (L) → Center → Front Right (R)
→ Rear Left (R) → Rear Right (L) → SubWoofer
You can adjust the volume during operating the test tone, first use
buttons to select Volume or Speaker option, then use the buttons
to select volume or speaker, so that the volume of all speakers is the
same from the listener’s position.
If you adjust the volume while operating the test tone, the test tone will
be held paused in the current speaker channel.
SPEAKER SETUP
AUDIO
Speaker
Volume
Distance
Test
Move Return
Select
Size
Front L
Large
0
dB
m(ft)
0.6(2)
Off
Enter
T524C_NAD_English_Final.qxd 1/25/05 2:48 PM Page 28