Filter
Top Products
PAGE 14 CONNECTIONS
Connecting to Surround Sound System (Cont’d)
Enjoying 2 Channel Digital Stereo Sound
Enjoying DTS Sound
12V
TRIGGER
IN
To DIGITAL OUT
(COAXIAL or
OPTICAL)
To S-VIDEO OUT
or VIDEO OUT
Connection example
Front speaker
(left)
Front speaker
(right)
TV
Receiver equipped with a
digital audio input
75 ohm coaxial cable or
optical cable
To digital audio input
To S-video Input
or Video Input
S-Video cable
or Video cable
12V
TRIGGER
IN
To DIGITAL OUT
(COAXIAL or
OPTICAL)
Front
speaker
(left)
Rear speaker
(left surround)
Rear speaker
(right surround)
Front speaker
(right)
Sub woofer
Center
speaker
75 ohm coaxial cable or
Optical Cable
Connection example
To digital audio input
Receiver equipped
with a DTS decoder
To S-VIDEO OUT
or VIDEO OUT
To S-video Input
or Video Input
S-Video cable
or Video cable
2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a
digital audio input and speaker system (right and left front speakers).
❍
Your A/V Receiver or processor must be equipped with a DTS Decoder.
❍
The digital output (see selecting digital output page 25) must be set to “stream”.
❍
The disc must have a DTS soundtrack.
❍
Refer to the owner’s manual of your audio system for operating instructions.
❍
Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
❍
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listen-
ing level. Otherwise, the speakers may be damaged by a sudden high volume sound.
❍
Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the
speakers may be damaged.
Notes
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.