Filter
Top Products
En-17
Operations in the Picture-in-picture mode
To move the position of the sub screen, press the cursor
ᮤ
or
ᮣ
button.
To change the size of the sub screen, press the
ᮢ
button.
VIDEO1 RGB1
A
B
VIDEO1 RGB1
A
B
VIDEO1 RGB1
A
B
VIDEO1 RGB1
A
B
ᮢ button
ᮢ button
ᮢ button
ᮢ button
To make the desired picture active, press the SELECT/
FREEZE button.
Selecting the input signals to be displayed
1. Press the SELECT/FREEZE button to make the desired
picture active.
2. Press the RGB/PC, VIDEO, or DVD/HD button.
Each press of the button changes the selection of the input
signal.
The INPUT SELECT button on the monitor can also be
used to change the selection.
Zooming in on a specific input
1. Press the SELECT/FREEZE button to make the desired
picture active.
2. Use the POINTER button and the ZOOM/ button to
enlage the picture.
For details, see “DIGITAL ZOOM” on page En-13.
Adjusting the OSM controls
1. Press the SELECT/FREEZE button to make the desired
picture active.
2. Press the MENU/ENTER button to display the MAIN
MENU.
3. Adjust the setting to your preference.
For details, see “OSM (On Screen Menu) Controls” on
page En-18.
Note:
During enhanced split screen, some functions of OSM
controls are not available.
VIDEO1 RGB1
A
B
VIDEO1 RGB1
A
B
SELECT/
FREEZE
button
VIDEO1 RGB2
A
B
VIDEO1 RGB2
A
B
RGB2
A
B
VIDEO1
A
B
VIDEO1
RGB2
Bottom Left Bottom Right
ᮤ
button
ᮣ
button
ᮣ
button
ᮤ
button
Top Right
ᮤ
button
ᮣ
button
ᮣ
button
ᮤ
button
Top Left
Downloaded From TV-Manual.com Manuals