Filter
Top Products
English-10
EXTERNAL CONTROL
OUT
2
IN
DVD/HD3
S-VIDEO IN
DVI AUDIO3
R
L
(MONO)
R
L
(MONO)
R
L
(MONO)
AUDIO2 AUDIO1VGA
Y Cr/Pr Cb/Pb
DVD/HD1
DVD/HD2
IN
VIDEO
AC IN
RL
SPEAKER (S)
1
3 4 5 6 7 8 10
9
12
11
13 14
Part Names and Functions
1) EXTERNAL CONTROL OUT (D-Sub 9 pin)
Connect RS-232C output to a second monitor.
2) EXTERNAL CONTROL (D-Sub 9 pin)
Connect RS-232C input to external equipment such as a
PC in order to control RS-232C functions.
3) DVD/HD3 (HDMI)
Input digital HDMI signals.
4) DVI
Input digital RGB signals from a computer or HDTV
device having a digital RGB output.
5) AUDIO3
Input the audio signal from external equipment such as a
computer, VCR or DVD player.
6) VGA (Mini D-Sub 15 pin)
Analog computer input.
7) AUDIO2
Input the audio signal from external equipment such as a
computer, VCR or DVD player.
8) DVD/HD1
Connect equipment such as a DVD player, HDTV device,
or set-top box.
9) DVD/HD2
Connect equipment such as a DVD player, HDTV device
or set-top.
10) AUDIO1
Input the audio signal from external equipment such as a
computer, VCR or DVD player.
11) S-VIDEO in
Input S-video.
12) VIDEO1
Composite video input.
13) EXTERNAL SPEAKER (L and R) connector
Connects to optional speakers. Output the audio signal
from AUDIO 1, 2, and 3 to external speakers.
NOTE: Speaker Terminal is for 8W + 8W (8 ohm).
14) AC IN
Connects with the supplied power cord.
Information:
For SCART connections there are 2 ways to connect:
SCART1: Connect R/G/B to the DVD/HD1 terminals and
composite sync. to the VIDEO1 terminal.
SCART2: Connect R/G/B + composite sync. to the VGA
terminal.
Terminal Panel
Downloaded From TV-Manual.com Manuals