Filter
Top Products
6
Removing the Base
Note: Always remove the Base when
shipping the LCD.
1.
Place monitor face down on a
non-abrasive surface.
2. Using your fingers, press the
release tab to unlock the stand.
3. Pull the unlocked base off the stand.
Connecting a Flexible Arm
This LCD monitor is designed for use with a flexible arm. Please use the screws
(4pcs) as shown in the picture when installing.
To meet the safety requirements, the monitor must be mounted to an arm which
guaranties the necessary stability under consideration of the weight of the monitor.
The LCD monitor should only be used with an approved arm (e.g. GS mark).
Tighten all
screws.
4 SCREWS (M4)
(MAX depth: 10.0 mm)
Weight of LCD assembly:
LCD193WXM : 4.3 kg (MAX)
LCD203WXM : 4.9 kg (MAX)
LCD223WXM : 5.3 kg (MAX)
Release Tab
Quick Start - continued
Thickness of Bracket
(Arm) 2.0~3.2 mm
100 mm
100 mm
12mm
4 x 12mm with lock washer
and flat washer
M4
If using other screws,
check depth of holes.