NEC LCD2070VX Flat Panel Television User Manual


 
English-12
Specifications for MultiSync LCD2070VX
Monitor Specifications MultiSync LCD2070VX Monitor Notes
LCD Module Diagonal: 51 cm/20.1 inches Active matrix; thin film transistor (TFT)
Viewable Image Size: 51 cm/20.1 inches liquid crystal display (LCD); 0.255 mm dot
Native Resolution (Pixel Count): 1600 x 1200 pitch; 300 cd/m
2
*
3
white luminance;
800:1 contrast ratio, typical.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms Digital Input: DVI-D
Sync: Separate sync.TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative
Sync on Green (Video 0.7 Vp-p and Sync. 0.3 Vp-p)*
2
Display Colours 16,777,216 Depends on display card used.
Viewing Angle Left/Right: 80°/80° (CR > 10)
Up/Down: 80°/80° (CR > 10)
Synchronization Range Horizontal: 31.5 kHz to 83.0 kHz Automatically
Vertical: 56.0 Hz to 75.0 Hz Automatically
Resolutions Supported 720 x 400*
1
: VGA-Text Some systems may not support all modes
640 x 480*
1
at 60 Hz to 75 Hz listed.
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768*
1
at 60 Hz to 75 Hz
1152 x 870*
1
at 75 Hz
1280 x 1024*
1
at 60 Hz to 75 Hz
1600 x 1200 at 60 Hz.................................. Recommended resolution is 60 Hz for
optimal display performance.
Active Display Area Horizontal: 408 mm/16.1 inches
Vertical: 306 mm/12.0 inches
Power Supply AC 100-240V ~ 50/60Hz
Power Consumption 44 W
(without optional Sound Bar)
Current Rating 1.05 - 0.55 A
Dimensions 442.0 mm (W) x 388.5-498.5 mm (H) x 220.0 mm (D)
17.4 inches (W) x 15.3-19.6 inches (H) x 8.7 inches (D)
Weight 8.6 kg (19.0 lbs)
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Humidity: 30% to 80%
Feet: 0 to 15,000 Feet
Storage Temperature: -10°C to 60°C/14°F to 140°F
Humidity: 10% to 85%
Feet: 0 to 40,000 Feet
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
*2 If your display is not showing a picture of the SOG and Composite Sync. Signal, please contact our hotline for further assistance.
*3 LCD Module at 25°C.
NOTE: Technical specifications are subject to change without notice.