Filter
Top Products
19
PICTURE SETTING
PICTURE CONTROL
You can select three pictures settings, by using the remote control NORMAL button (A17)
:
- Normal I (standard hard picture)
- Normal II (standard soft picture)
- Favourite
For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE
REDUCTION, use the PICTURE menu.
If an NTSC signal is received, then the TINT adjustment will also be available.
01
ABC
NORMAL I
18:20
01
ABC
NORMAL II
18:20
01
ABC
FAVOURITE
18:20
PROGRAM STATUS DISPLAY (Recall)
Use the remote control RECALL button
(A16) to display (for 4 seconds only)
program status information. This display
appears also after a program selection
or switching on the TV set.
01
ABC
MONO
18:20
Dolby PLII
Channel name
Sound transmission Mode:
Displayed with forced icon( ) only if
forced to mono by MODE button (A14)
Sound Mode Indication
Channel number
Clock
SLEEP FUNCTION
The set will turn off (to stand-by mode) after a period of time that you can select. By repeated use of the remote control
SLEEP button (A4), you can enter one of the following settings :
OFF > 20 min > 40 min > 60 min > 80 min > 100 min > 120 min > OFF
The SLEEP time remaining (before TV turn-off) can be seen again at any
time by one touch on the remote control SLEEP button (A4).
A second touch (while the status display is active) will modify the SLEEP time
remaining.
01 ABC
STEREO
20
Remaining time (minutes)
before TV set switches off
FORMAT SELECTION
The user can be forced the preferred mode by repeated pressing of the
remote control ZOOM button(A15) :
the following picture formats are available :
STANDARD > PANORAMA > ZOOM 1 > ZOOM 2 > 4 : 3
Remark : This function is not used in DTV INPUT mode.