Filter
Top Products
Navtex NX2600
7
6 USING THE NEXUS CUSTOM SOFTWARE ON YOUR PC
1. Specification
1.1 The input baud rate of the UI is 9600, it can only connect the PC through USB
connector.
1.2 NX2600 receiver will receive the message automatically when there is a NAVTEX
signal.
1.3NX2600 has the functions to save and delete the message.
1.4 NX2600 has the functions to open and view all the messages that have been
stored.
1.5 When you connect the computer with the printer, you can print out the message
from the printer.
7 Installation, use and uninstall
7.1 Install the software：
Double click the , and then follow the instruction to install the
software. The program file will be saved in ”C:\Program Files\NAVTEX Receive
Software” after installation.
7.2 How to use the Software
2.2.1 Double check the in file “NAVTEX Receive
Software” to open the program, the interface will be illustrated as below: