Filter
Top Products
GB 9
This section describes how to operate the Mediamaster using the buttons on the remote control.
Some of the functions can also be carried out using the buttons on the front panel.
Switch the Mediamaster in and out of standby mode.
EXIT TV Return to the viewing mode from a menu without storing settings
(in menu mode).
Switch between TV or Radio (in viewing mode).
Turn the sound off/on (mute).
Adjust the volume of digital programmes.
The Mediamaster s maximum level is controlled by the TV s present volume setting.
0 — 9 Change channel and to select individual menu options.
Note:If 0 is entered as the first digit, the TV Release functionality is activated (see below)
0 TV Release. To switch between digital TV/Radio, analogue TV and analogue satellite TV
and VCR, when your systems are connected by SCART cables.
Info. To display short and extended information (if transmitted)
about current and next programmes.
BACK Go back one level in the menus without storing settings.
TEXT Select teletext information. Press to enter Teletext
(if available).
MENU Show the Main Menu screen.
GUIDE Obtain a list of present and following programmes for the
available channels. This information is only shown if your
Service Provider transmits programme information
(EPG information).
P+ P- Change channels up and down by one unit.
Change page in a menu/list/text if more than one page
is available. To browse through teletext history.
Move up/down in the menus and to change channels.
Change settings in menus
OK Confirm choices and selection of a highlighted item.
To display the TV/Radio channel list.
(Red) Reserved for future application.
OPTION (Green) To select service options in viewing mode.
FREEZE (Yellow) To select the freeze function.
Press once to freeze the screen picture.
Press any other key to go to normal mode again.
(Blue) To toggle between present and previous TV/Radio channels
.
REMOTE CONTROL