Filter
Top Products
2
Ref. # Description
1 Antenna
2 Countersink screws
3 Mounting surface
4 O-ring
5 Pre-drilled mounting holes
4. Remove the dust cap from the antenna’s TNC connector.
5. Attach the coaxial cable’s male TNC connector to the antenna’s TNC connector.
Ref. # Description
1 Mounted antenna
2 Mounting surface
3 TNC connector
4 Coaxial cable
6. Attach the other end of the coaxial cable to the antenna input port on the receiving device. The
receiving device must be equipped to provide power as detailed in the SPECIFICATIONS section of
this guide. All NovAtel GNSS receivers provide the necessary power through the antenna RF
connectors.