Filter
Top Products
RS232
8
Understanding the LAN Error LED
The front panel of the NV-MPS4 has a red LED designed to alert you to communication issues across its network, Fig. 5. The
state of the LED indicates the nature of the problem.
LED not lit: This indicates good communication. No problem is found.
LED solid red: A cable connection at the “Ethernet” port on the back panel is not detected.
LED blinking twice: There is no WAN, Wide Area Network detected or no Internet connectivity.
LED blinking three times: This is no LAN, Local Area Network detected.
Fig. 5
LAN Error LED
Accessing the Remote Configuration Tool from the Local Area Network
Go to your computer and make sure it is connected to the same network as the NV-MPS4 (this is usually a wireless
connection). Open an Internet browser window and type the default name, music-port/config in the address bar, Fig. 5.
Fig. 5
This should open the Remote Configuration Tool, Fig. 6.
Fig. 6