One for All OARH01B Universal Remote User Manual


  Open as PDF
of 26
 
3
Setting up the remote
4HEREARETWOWAYSTOPROGRAMTHISREMOTETOCONTROL
your devices: by entering the code directly or by
searching through the codes to find the one that
controls your device. Try the Direct code setup first.
Direct code setup
1. Find the code for your device in the Code list. Codes
are listed by device type and brand name. The most
popular code is listed first. Make sure your device is
SWITCHEDONNOTONSTANDBY
2. Press the device key on this remote for the device
YOUWISHTOSETUP
 0RESSANDHOLDDOWNTHE3%4KEYUNTILTHE
POWERKEYBLINKSTWICETHEKEYWILLBLINKONCE
THENTWICE
 %NTERAlVEDIGITCODEFORYOURDEVICESBRANDUSING
the number keys. The
KEYBLINKSTWICE
Note: If the
key gives one long blink instead of
two shorter blinks, you’ve entered an invalid code.
Try entering a code again.
 .OWAIMTHISREMOTEATYOURDEVICEANDPRESS
POWER)FYOURDEVICESWITCHESOFFTHEREMOTEIS
ready to operate your device.
 4URNYOURDEVICEBACKONANDTRYALLTHEREMOTES
FUNCTIONSTOENSURETHEYAREWORKINGPROPERLY)F
THEFUNCTIONSDONOTWORKPROPERLYREPEATSTEPS
1–5 using another code listed for your brand.
 )FYOURDEVICEDOESNOTRESPONDFOLLOWSTEPSTO
WITHEACHCODELISTEDFORYOURBRAND)FNONEOF
THECODESLISTEDFORYOURBRANDOPERATEYOURDEVICE
ORIFYOURBRANDISNOTLISTEDATALLTRYTHESEARCH
method described in the next section.
Important notes:
s )FYOURDEVICEDOESNOTRESPONDORISNOTFUNCTIONING
PROPERLYWITHONEOFTHECODESTRYANOTHERCODE
listed under your brand.
s )FYOURDEVICESORIGINALREMOTECONTROLDOESNOT
HAVEA0/7%2KEYPRESS
(play) instead of
POWERWHENSETTINGUPYOURDEVICE
s 2EMEMBERTOPRESSTHECORRECTDEVICEKEYBEFORE
operating your device. Only one device can be
assigned to a device key. If your original remote
OPERATESMORETHANONEDEVICEYOUNEEDTOSETUP
each device separately.
 previous next